01 Aluminium Blister Foil

Aluminium Blister Lidding Foil

We offer Aluminium Blister Lidding Foil suitable for sealing with Rigid PVC Film, PVDC coated PVC film, Cold forming foil (alu-alu base foil) etc. We offer blister lidding foil with heat seal lacquer suitable for sealing with any one of the above base materials or sealing compatibility with all types of base material, depending on customer’s specific requirements.

We offer blister foil in thickness of 20 and 25 micron (+/-8). This foil is hard tempered rolled in alloy AA1200/AA1235/AA8011. Aluminium blister foil is pack rolled and hence one side is dull (matt) and another side is bright (shiney). One side of the foil is coated with Print Lacquer to make it suitable for surface printing (roto gravure / flexo) and other side is coated with heat seal lacquer to make it suitable for sealing with base materials like PVC film, PVDC coated PVC film and cold forming alu-alu base foil.

We offer various options of heat seal lacquer coating & print-primer depending on customer’s requirements.

Standard structures of our aluminium blister lidding foil are :

  • Print lacquer 1 gsm / 20 or25 micron foil / 4-6 gsm or6-8 gsm heat seal lacqauer suitable for sealing with PVC film or Cold Forming Alu-alu base foil.
  • Print lacquer 1 gsm / 20 or25 micron foil / 6-8 gsm heat seal lacqauer suitable for sealing with PVC film, PVDC coated PVC film and Cold Forming Alu-alu base foil.
  • We offer printed lidding foil also. We can print upto 5 colour plus print protective varnish overcoat. We also offer both side printed blister foil.
  • We also supply unprinted aluminium blister lidding foil with special type of Print-primers suitable for online printing (like Hapa machines etc).
  • All raw materials comply with requirement of CFR 21, 175.300 with direct contact to foodstuffs (indirect food additive) and thus to the basic requirements of FDA.

Detailed Technical Data Sheet is available on request.

02 Alu-Alu foil-Cold forming foil

Alu Alu Cold Forming Base Foil

We offer Alu-Alu Cold Forming Base Foil for pharmaceutical blister packing. It is suitable for all kinds of flat bed blister packing machines. We offer unprinted as well as printed cold forming foil.

Foil is either surface printed on OPA side or reverse rotogravure printing is done on OPA film prior to lamination with aluminium foil. In case customer wish to print alu alu cold forming foil at their end, then it needs to be coated with print primer according to printing method (rotogravure or flexo).

We offer wide range of structures of alu-alu cold forming base foil, as recommended by customer or their machine supplier. The commonly used standard structures are as follows : 

  • 25 micron OPA film / 45 micron aluminium foil / 60 micron rigid PVC film
  • 25 micron OPA film / 50 micron aluminium foil / 60 micron rigid PVC film
  • 25 micron OPA film / 60 micron aluminium foil / 60 micron rigid PVC film.

In case of these structures OPA side of the laminate is wound outside in reel form and PVC side inside. PVC side of this laminate is sealed with aluminium blister lidding foil. In case customer needs inverse winding, then same can also be offered on specific request.

All raw materials comply with requirement of CFR 21, 175.300 with direct contact to foodstuffs (indirect food additive) and thus to the basic requirements of FDA.

Detailed Technical Data Sheet is available on request.

03 Polyester-Foil Laminates

Polyester Foil Laminates For Sachets and Pouches

We offer various structures of Polyester-Foil Laminate according to customer’s product packing requirement and type of form fill machine they are using. We offer unprinted and printed structures (upto 7 colours) for sachets / pouches. In case of printed structures, we supply laminate with reverse printing on polyester film and then further lamination with aluminium foil. This improves the characteristics of printing & aesthetic appearance. Printing also becomes resistant to scratches due to friction or handling and also to heat.

Some of the standard Polyester/Foil laminate structures are :

  • 12 micron Polyester / adhesive / 12 micron foil / 37 to 50 micron LDPE
  • 12 micron Polyester / adhesive / 9 micron foil / 37 to 50 micron LDPE
  • 12 micron Polyester / 12-17 micron LDPE / 12 micron foil / 37 to 50 micron LDPE
  • 12 micron Polyester / 12-17 micron LDPE / 9 micron foil / 37 to 50 micron LDPE

Other structures are also offered according to customers requirements.

In above laminate structures, LDPE is formulated according to application/end use, machine speed, type of machine etc. LDPE film is either laminated to aluminium foil or LPPE is directly extruded on foil surface depending on application/endues of laminate structure. Co-polymers are also used for some critical applications.

Detailed Technical Data Sheet is available on request.

04 Paper Foil Laminates

Paper Foil Laminates For Sachets and Pouches

We offer various structures of Paper-Foil Laminates according to application/end use of laminate and machine parameters. We offer upto 7 colour printing on paper surface as per customer’s designs. We also offer unprinted structures for printing at customers end.

We can offer any kind of structures as per customer’s requirement. The commonly supplied structures are as follows :

  • 41 gsm Paper / 12-17 micron LDPE / 12 micron foil / 30 to 50 micron LDPE
  • 41 gsm Paper / 12-17 micron LDPE / 9 micron foil / 30 to 50 micron LDPE
  • 41 gsm Paper / adhesive / 12 micron foil / 30 to 50 micron LDPE
  • 41 gsm Paper / adhesive / 9 micron foil / 30 to 50 micron LDPE

Other structures are also offered according to customers requirements like higher thickness of paper or lower thickness of LDPE layers. We offer co-polymers in sealing layers in case of some specific applications.

We offer these laminates with Indian paper or imported paper, depending on customer’s requirement about printing appearance.

Detailed Technical Data Sheet is available on request.

05 Aluminium Strip Foil

Aluminium LDPE Strip Packing Foil

We offer Aluminium-LDPE Strip Packing Foil for pharmaceutical packing application. In case of aluminium strip foil, LDPE layer is sealed with LDPE layer and foil is visible from both sides.

Aluminium strip foil is made of 30 or 45 micron (+/-8%) soft aluminium foil in alloy AA1200/AA8011/AA1235. This foil is with one side dull and other side bright. One side of the foil is laminated 30 to 40 micron LDPE and other side is either printed or made suitable for printing.

We offer printed strip foil with surface printing upto 5 colours  and with print protective overcoat.

The commonly supplied structures are :

  • 30 micron foil /30 micron LDPE
  • 30 micron foil / 37.5 micron LDPE
  • 40 micron foil / 37.5 micron LDPE
  • 40 micron foil / 45 micron LDPE

We also offer various Aluminium Foil and LDPE thickness as per customer’s requirement.

In all above cases, LDPE is either laminated with foil or LDPE is directly extruded on foil surface, depending on customer’s requirement.

Detailed Technical Data Sheet is available on request.

06 Rigid PVC Film

Thermoforming Rigid PVC Film

We offer various thicknesses of Thermoforming Rigid PVC Film for Pharmaceutical Blister Packaging. These PVC films are produced by calendaring method and are suitable for rotary and flat bed blister packaging machines. These films can be heat sealed with wide range of backing materials like aluminium blister foil or Paper with heat seal lacquer coating. These films are suitable for normal and high speed blister packing machines.

Commonly manufactured thicknesses of rigid PVC film for the pharmaceutical blister packaging are 200 micron, 250 micron, 300 micron and 350 micron. Our factory can produce any thickness from 150 micron to 400 micron.

These films are either Glass Clear or Coloured (as per our standard shade card). They are either transparent or opaque as per customer’s requirements.

We also offer PVC film with UV stabilizers for light sensitive applications.

We offer special grades for deep drawing applications, with excellent dimensional stability.

Rigid PVC films are manufactured from excellent quality pharmaceutical grade raw materials using latest calendaring technology, under controlled environment with full production traceability. Manufacturing conditions complies with GMP norms.

These films comply with European Pharmacopeia and with the directive 2002/72/EC and amendments in their current version. Also comply with US code for Federal Regulations CFR21 and with the US Pharmacopeia where applicable.

Detailed Technical Data Sheet is available on request.

PVDC coated PVC film 07

PVDC Coated PVC Film

We offer wide range of PVDC coated PVC Films for Pharmaceutical Blister Packaging. PVDC coating provides moisture and oxygen barrier depending on grammage of PVDC coating. PVDC coated Films are suitable for packing of hygroscopic/ moisture sensitive products. We can offer PVDC coating thickness range from 40 gsm to 120 gsm, depending on customer’s product requirement.

Commonly used specifications are :

  • 250 micron PVC film / 40 gsm PVDC coating
  • 250 micron PVC film / 60 gsm PVDC coating
  • 250 micron PVC film / 90 gsm PVDC coating
  • 300 micron PVC film / 60 gsm PVDC coating
  • 300 micron PVC film / 90 gsm PVDC coating.

These PVDC films are suitable for medium to high speed blister packaging machines. They work well on both flat bed and rotary blister packing lines.

Base PVC films are either Glass Clear or Coloured (transparent /opaque) depending on customer’s requirements.

These films comply with European Pharmacopeia and with the directive 2002/72/EC and amendments in their current version. Also comply with US code for Federal Regulations CFR21 and with the US Pharmacopeia where applicable.

Detailed Technical Data Sheet is available on request.

9 suppository-packing-film

Suppository Packing Film

We offer various PVC/PE and PVC/PVDC/PE structures for Suppository Packaging / mono dose  / unit dose packing. Offer thickness of PVC film, PVDC coating and PE film thickness as per customers’ requirement. There are two types of PE, one can provide permanent seal while other can open clearly at the time of peeling. In this case, PE (i.e. LDPE) comes in contact with product.

Mostly white opaque PVC films are used as base films. However, we can offer Amber/Orange/Brown or any other colours as per customer’s requirement for base PVC films.

Commonly used structures are as follows :

  • 100 micron PVC film / 30 to 40 micron PE film.
  • 120 micron PVC film / 30 to 40 micron PE film.
  • 150 micron PVC film / 50 micron PE film.
  • 250 micron PVC film / 50 micron PE film.
  • 200 micron PVC film / 40 gsm PVDC coating / 40 or 50 micron PE film.

We can offer any structure as per recommendations of suppository/mono dose packing machine manufacturer.

Detailed Technical Data Sheet is available on request.

8 pvdc-triplex-films

PVDC Triplex Films

We offer PVC/PE/PVDC Triplex Films for pharmaceutical blister packaging application involving deep and large cavity blister packs. PVDC coating improves the barrier properties of the film. These films are suitable for packing of hygroscopic/moisture sensitive products.

We can offer PVC/PE/PVDC structures as per customer’s requirements.

Commonly supplied structures are :

  • PVC/PE/PVDC – 200/25/40
  • PVC/PE/PVDC – 200/25/60
  • PVC/PE/PVDC – 200/25/90
  • PVC/PE/PVDC – 250/25/40
  • PVC/PE/PVDC – 250/25/60
  • PVC/PE/PVDC – 250/25/90

These films are available in Glass Clear or any standard colour (transparent or opaque).

Detailed Technical Data Sheet is available on request.

4 paper-pe-for-strip-packing

Paper PE For Strip Packing

We offer Paper/PE structures for pharmaceutical strip packing applications. In this case, PE film is directly extruded on paper. We offer various thickness of paper and any thickness of PE as per customer’s requirements.

Commonly supplies specifications are :

  • 41 gsm Paper / 30 micron LDPE
  • 41 gsm Paper / 40 micron LDPE
  • 60 gsm Paper / 40 micron LDPE

We offer both unprinted and printed Paper/PE laminate for strip packing. Printing is upto 5 colours rotogravure printing.

This Paper/PE specification is mostly used for packing of non-moisture sensitive products.

3 paper-hsl-for-blister-packing

Paper HSL For Blister Packing

We offer various type of Papers coated with heat seal lacquers for packing of pharmaceutical products like vials, droppers, syringe, tablets etc. We offer various thickness of paper coated with heat seal lacquer (HSL) compatible for sealing with rigid PVC film.

Commonly supplied specifications are :

  • 41 gsm Paper / 3-5 gsm heat seal lacquer
  • 50 gsm Paper / 3-5 gsm heat seal lacquer
  • 60 gsm Paper / 4-6 gsm heat seal lacquer

We offer both unprinted and printed Paper/HSL blister packing paper. Printing is upto 5 colours rotogravure printing.

This Paper/HSL specification is mostly used for packing of non-moisture sensitive products.

02 metallized-pvc-blister-film

Metallized PVC Blister Film

We offer metallised rigid PVC film for blister packaging of tablets/capsules. Metalizing is done is various colours as per customers requirements. Most popular colours are Silver, Gray, Gold, Copper, Blue, Red and Dark Brown. These metallized blister packs look similar to cold forming (alu-alu) blister packs. However, they offer barrier properties of PVC film only. They can be processed on regular blister packing lines (rotary or flat bed). Also pack size is smaller as compared to cold form blister packs.Due to their unique appearance and better machinabilty, they are chosen for packing of less barrier sensitive products.

Detailed Technical Data Sheet is available on request.

5 pre-cut-labels

Pre Cut Labels

We offer unprinted and printed Pre-cut labels as per customer’s requirements. We have variety of printing options for pre-cut labels as per the latest trends in the respective industry.

6 printed-cartons

Printed Cartons

We offer various types of printed cartons as per customer’s requirements mainly for food and pharmaceutical industry. They are manufactured out of Indian board or imported board depending on specific requirement of product. These cartons are suitable for automatic packing lines.

We offer metallised polyester laminated cartons, holographic cartons, Braille Cartons , Micro Text Printed Cartons, Coin reactive cartons, window cartons, cartons with micro embossing, multi colour micro foil stamping and cartons with 3D embossing effect.

We also offer printed inserts according to customer’s requirements.

01 lami-tube-webstock

Lami Tube Webstock

We offer laminate webstock for production of lami tubes as per customer’s specifications. We offer unprinted lamitube webstock, suitable for flexo printing. We offer webstock with aluminium foil (ABL) and without aluminium foil i.e. consisting on only plastic films (PBL)

We offer various structures of ABL and PBL laminates as per customer’s requirement in reel form. The commonly used configurations are:

ABL (Aluminium barrier laminate) structures :

  • 5 Layer Structure : Print Layer / Co-Ex Layer / Alu. Foil / Ext. Layer / Sealant Layer
  • 7 Layer Structure : Print Layer / Co-Ex Layer / Alu. Foil / Ext. Layer /Plain PET / Ext.Layer/ Sealant Layer

PBL (Plastic barrier laminate) structures : 5 Layer Structure: Print Layer / Co-Ex Layer / EVOH or Nylon or PET / Ext. Layer / Sealant Layer

Detailed technical specifications of ABL and PBL laminate structures are available on request.